Fundamental Mistakes to Avoid During Smoke Alarm Installation

Smoke alarms are sometimes installed by home owners without them realising the fact that anything can go wrong at any point of time, because of a fault that went unnoticed or probably because of an installation error. Even though its easier to install these security devices, we will still recommend you get in touch with a professional who is best in the trade. The biggest reason for hiring professionals, is they are well equipped and knowledgeable ensuring to avoid the mistakes which normally householders make when it comes to smoke alarm installation in Ipswich. Have a look: 

Setting false triggers 

Even though smoke alarm systems are meant to save lives they can be extremely disturbing at times. Want to know how? There are times when the alarm would set off false triggers, where inmates are fooled thinking that there has been an actual threat around the property. Now you must be wondering what might cause a smoke alarm to set off false triggers? Most of the times, when people install them in the wrong place, the systems start alarming wrongly. That’s one of the reasons why you should never try to install it yourself because it’s the work of an expert. Generally, professionals recommend that you install the alarms near doors and ducts. 

Installing the alarm very close to the bathroom or kitchen

We will tell you why it’s a major mistake and why you must avoid it all cost. Even though you may think that getting a smoke alarm installation in Ipswich near the bathroom is a great idea since it will give maximum coverage; but think again. According to experts, alarm systems must be placed at least around 10 feet away from the shower or the laundry room as moisture will take no time to destroy the security device. Soon the alarm located near a shower will get damaged.

Missing out the basement 

If you have mistakenly overlooked the basement, rush to the smoke alarm company and get one for the subfloor. A considerable number of households don’t have a smoke alarm at the basement, increasing risks of fire. Each and every space should be considered important for coverage. 

Leaving the smoke alarms unconnected 

Always remember interconnected smoke alarms are a necessity if you want to receive prompt signals. When they are interconnected the systems communicate with each other and set off the alarm in an integrated way, so that you are warned of fire irrespective of where it has happened. This provides maximum protection throughout the property. 

Installing same kind of smoke alarm systems 

Not all smoke alarms are the same. Basically, there are two different types. One is the photoelectric and the second is the ionization. They all are meant to defect different types of fire. The photoelectric alarms are meant to detect the smouldering fires while the ionization systems identify actual flames. The two different smoke alarm systems respond very differently. 

We will recommend you get an alarm system with both types of sensors. 

Overruling a test 

When you are considering smoke alarm installation in Brisbane its usual for you to think about the installation and placement processes but the one crucial thing which you never miss out on is a final test after the system has been installed. The fire safety system must be checked by means of a test to ensure they are in perfect functional condition. Furthermore, most often householders are seen not maintaining their alarm system. 

All alarms must be tested to ensure your house is protected all the time. A good smoke alarm system is a necessity. 

Always keep these mistakes in mind to ensure optimal functionality of the device.